Contact us: +32 57 30 11 66
  • Facebook
  • YouTube
  • LinkedIN

The fittings for vertical sliding door panels up to 75 kg

  • Assunta system

    Assembled system

    The Assunta 75 system consists of a motor connected to two belt shafts. Two belts run over these belt shafts, which are attached to the bottom door panel by means of belt clips. The doors are guided upwards via the special guide blocks which run in the milled grooves in the side walls.

  • Assunta positions

    The different positions of the moving panels

  • Assunta components

    Components

    The complete package consists of a motor, control cabinet, all necessary mechanical parts and the electrical connection cables. An extensive manual is also provided.

  • GENERAL CHARACTERISTICS
    Made in Belgium.
    Suitable for 1, 2, 3 or 4 moving panels.
    Standard width up to 3 m, optionally up to 6 m.
    Maximum total weight of moving panels: 75 kg.
    A more powerful motor is optional, for moving panels with a weight up to: 150 kg.
    Suitable for both surface mounted and recessed doors.
    Operation with push buttons, remote control and home automation.
  • Video
  • Video
  • Assunta Comfort

    Version 1: COMFORT

    Comfort has deceleration points for picking up and dropping off the next panel.

    • low-noise motor
    • secured with safety rail (stops in case of obstruction and opens again)
    • controlled speed
  • Assunta Essential

    Version 2: ESSENTIAL

    Essential runs at a continuous speed, without deceleration.

    • low-noise motor
    • secured with safety rail (stops in case of obstruction)
  • Aletta - TV

    Integration

    Perfect integration in the kitchen, with its own choice of materials, the cabinet with Assunta forms a whole with the rest of the kitchen.

  • Assunta, discover why...

    Single movement

    The cabinet opens in a single movement. There are no open doors or hatches and no visible fittings.

  • Assunta - Kitchen

    Kitchen

    White storage cupboard with fixed panel, framed in awning.

  • Assunta - Kitchen

    Kitchen

    The cupboard behind the sink is completely closed.

  • Assunta - Kitchen

    Kitchen

    Applied in a fully white lacquered kitchen.

  • Assunta - Kitchen

    Kitchen

    Top cabinet across the width of the sink

  • Assunta - Living

    Living room

    Two cabinets on either side of the heater.

  • Assunta - Living

    Living room

    Television cabinet closed with one large moving panel.

  • Assunta - Fireplace

    Fireplace

    With three moving panels above the fireplace

  • Assunta - Desk

    Desk

    Office filing cabinets equipped with Assunta.

  • Assunta - Motor unit

    Motor
    (Basic package - Comfort)

  • Assunta - Motor unit

    Motor
    (Basic package - Essential)

  • Assunta - Control cabinet

    Control cabinet
    (Basic package - Comfort)

  • Assunta - Control cabinet

    Control cabinet
    (Basic package - Essential)

  • Assunta - Remote control

    Remote control
    (Basic package - Options)

  • Assunta - More powerful motor

    More powerful motor
    (Basic package - Options)

  • Assunta - Longer belts

    Longer belts
    (Basic package - Options)

  • Assunta - Rollers

    Rollers
    (Basic package)

  • Assunta - Bearing end plates

    Bearing end plates
    (Basic package)

  • Assunta - Belts

    Belts
    (Basic package)

  • Assunta - Cable reel

    Cable reel
    (Basic package)

  • Assunta - End block

    End block
    (Basic package)

  • Assunta - Strip holders

    Strip holders
    (Basic package)

  • Assunta - Belt clips

    Belt clips
    (Basic package)

  • Assunta - Power cable

    Power cable
    (Basic package)

  • Assunta - Joint cable

    Joint cable
    (Basic package - Essential)

  • Assunta - Fastening material

    Fastening material
    (Basic package)

  • Assunta - Belt shafts

    Belt shafts
    (Expansion)

  • Assunta - Safety rail

    Safety rail
    (Expansion)

  • Assunta - Guide blocks

    Guide blocks
    (Accessories)

  • Assunta - Follower brackets

    Follower brackets
    (Accessories)

  • Assunta - Glide plates

    Glide plates
    (Accessories)

  • Assunta - Door aligner set

    Door aligner set
    (Accessories)

  • Assunta - Ball catches

    Ball catches
    (Accessories)

  • Assunta - Side guide rails

    Side guide rails
    (Options)

  • Assunta - Extension cable set

    Extension cable set
    (Options)

  • Business brochure NL

    Business brochure NL

    Business brochure in Dutch.

  • Business brochure FR

    Business brochure FR

    Business brochure in French.

  • Business brochure EN

    Business brochure EN

    Business brochure in English.

  • Business brochure DE

    Business brochure DE

    Business brochure in German.

  • Consumer flyer NL

    Consumer flyer NL

    Consumer flyer in Dutch.

  • Consumer flyer FR

    Consumer flyer FR

    Consumer flyer in French.

  • Consumer flyer EN

    Consumer flyer EN

    Consumer flyer in English.

  • Consumer flyer de

    Consumer flyer DE

    Consumer flyer in German.

  • Order form NL

    Order form NL

    Order form in Dutch.

  • Order form FR

    Order form FR

    Order form in French.

  • Order form EN

    Order form EN

    Order form in English.

  • Order form DE

    Order form DE

    Order form in German.

  • Vademecum 1 panel

    Vademecum 1 panel

    Vademecum for one panel in all languages.

  • Vademecum 2 panels

    Vademecum 2 panels

    Vademecum for two panels in all languages.

  • Vademecum 3 panels

    Vademecum 3 panels

    Vademecum for three panels in all languages.

  • Vademecum 4 panels

    Vademecum 4 panels

    Vademecum for four panels in all languages.

  • CE document NL

    CE document NL

    CE document in Dutch.

  • CE document FR

    CE document FR

    CE document in French.

  • CE document EN

    CE document EN

    CE document in English.

  • CE document DE

    CE document DE

    CE document in German.

  • Installation Manual

    Installation Manual

    Installation manual in all languages.

  • Milling Manual

    Milling Manual

    Milling manual for ‘recessed panels’ in all languages.

  • Milling Manual

    Milling Manual

    Milling manual for ‘surface mounted panels’ in all languages.

  • 3D PDF Manual

    3D PDF Manual NL

    Manual for working with 3D PDF files in Dutch.

  • Manual for connecting the remote control NL

    Manual for connecting the remote control NL

    Manual for connecting a remote control in Dutch.

  • Manual for connecting new remote control NL

    Manual for connecting new remote control NL

    Manual for connecting a new remote control in Dutch.

  • Manual for programming the remote control NL

    Manual for programming the remote control NL

    Manual for programming a transmitter for the remote control in Dutch.

  • Manual for programming new remote control NL

    Manual for programming new remote control NL

    Manual for programming a transmitter for the new remote control in Dutch.

  • Manual for programming additional remote control NL

    Manual for programming additional remote control NL

    Manual for programming an additional transmitter for the remote control in Dutch.

  • Manual for checking the PTA NL

    Manual for checking the PTA NL

    Manual for checking the Pulse Counter Adapter (counting sensor) in Dutch.

  • What are the dimensions of the Assunta control cabinet?

    Depth = 170 mm (handle included).

    FAQ - Dimensions control cabinet
  • Can the electrical cabinet be placed in the technical area?

    This is strongly discouraged. If a problem occurs while the doors are at the top, there is no way to intervene. After all, the control cabinet won’t be accessible! It will then be necessary to loosen the belts of the bottom panel in order to remove the panels from the technical area.

  • Can the Assunta system be connected to home automation?

    This is perfectly possible. Your home automation can be connected to the inputs for the push buttons. Make sure you use 'dry' contacts, as the common terminal of the connector is live. Set a pulse duration of 0.2 - 0.5 seconds.

    FAQ - Connecting to home automation
  • What is the length of the cables between the motor and the control cabinet?

    The length of the cables is 4 m. Should this still be too short, the connection can be extended by means of a separately available extension cable set, also with a length of 4 m. This will bring the total length to 8 m.

  • My Assunta panel(s) is/are not at the bottom or does/do not move(s) down. Moving upward does not cause any problems.

    There is likely a problem with the safety rail. This must of course be connected, but it must also function properly. Its operation can best be checked via the LEDs on the circuit board in the control cabinet. The LED circled in red should light up if the safety rail hangs freely.

    FAQ - LED strip circuit board
  • My Assunta panel(s) is/are not at the bottom or does/do not move(s) down. Moving upward does not cause any problems.

    You may have already tried with a RESET (disconnecting the power cable, wait a while and plug it back in). For some reason, the panels probably didn't stop at the bottom, and the motor continued to run until the panels were mechanically stopped at the top. At this point, it is a question of getting the panels back down and letting the belts unroll and then let them run down once until the doors once again roll up correctly. Forcing the panels to move can be done using the small push buttons on the circuit board. Normally, FWD is up and REV is down, but since the belts did not roll up properly, FWD must be pressed (and hold) to move the doors down. Let the doors run until the belts regain their correct position. Now you can once again use the 'normal' red push buttons.

    FAQ - LED fwdrev circuit board
  • The ground fault circuit interrupter fails during the installation of the Assunta control cabinet.

    The control cabinet of your Assunta system is equipped with a frequency converter. This may generate a small loss in current at start-up. If your electrical installation's ground fault circuit interrupter has limited capacity or is excessively sensitive, it may switch off the voltage when switching on the Assunta control cabinet. The only solution is to install a better suitable ground fault circuit interrupter.

  • How do I calculate the theoretical length of the follower bracket?

    The exact additional length (L) of the follower bracket is calculated as follows:
    L = sum of the thicknesses of all panels (including the fixed panel)
      + number of moving panels x 10
      + 9 mm
      - thickness of the panel to which the bracket is attached.

    FAQ - Follower bracket
  • The set decelerations always occur at different times.

    There is likely something wrong with the pulse counter on the motor. The pulse counter does not consistently receive the signals.

  • Can the lights (in the Assunta cabinet) be switched on and off when the cabinet is open?

    For the Comfort version, optional contacts are available on the control cabinet. Lighting or home automation can be connected to it. (max. 12A) The contacts are controlled together as your cabinet opens or closes. Below you will find a table explaining the switching conditions. The illustration shows the wiring diagram for the connection.

    Open Closed
    NOcontact when the cabinet
    is fully open
    contact when the cabinet
    is fully closed
    NCcontact from the moment
    the cabinet starts closing
    contact from the moment
    the cabinet starts opening
    FAQ - Externe contacten
  • The Assunta panels of the cabinet made to my wishes should be in the same plane as the adjacent revolving doors.

    This is referred to as a ‘surface mounted' configuration. The panels protrude over a distance (Y) from the body of the cabinet. This allows the revolving doors to rest on the side wall(s) of the body thus concealing them. You can select this configuration using the order form or the drawing request. You only need to specify the depth and the Y value.

    FAQ - Surface mounted panels
  • I received a 3D PDF file and I don't know how to use it.

    On this website you will find a manual about 3D PDF files. Click here for this manual.

  • The frequency inverter in the control cabinet displays the error: E012.

    This error code is displayed when the motor was forced to operate at excessive force (overcurrent). This means that either a mechanical blockage occurred during opening or that your panels are too heavy for the motor. Check the entire cabinet for mechanical blockages. If no blockage is found, your panels are likely to be too heavy. You can opt for a more powerful motor, to this end, contact us for more information. The error code can be cleared by pressing the red RESET button for 3 seconds.

    FAQ - Error E012
  • The system always stops when moving upwards.

    When the Comfort motor must pull too hard due to the weight of the panels or a mechanical blockage, it will obviously stop working. This may be the cause of your problem. Check the entire cabinet for mechanical blockages. If no blockage is found, your panels are likely to be too heavy. If necessary, calculate how much they theoretically weigh. If this exceeds the load capacity of the motor (75 kg), you will either need to opt for lighter panels or a more powerful motor. Please contact us for the options. You can reset the system by performing a 'hard' reset (Disconnect the power supply momentarily from the control cabinet).

  • I have purchased a system without a remote control, but I would like a remote control after all.

    You can purchase and install a remote control module. Contact us if you are interested in this. After your order, it can be installed easily by following this manual .

  • Programming a new remote control for a system.

    The remote control can be programmed on the receiver in the control cabinet. This can be done by following this manual.

  • I would like to use an additional remote control transmitter for the system.

    You can purchase and program a new remote control. Contact us if you are interested in this. If you have an additional remote control, it can be programmed easily by following this manual .

  • The system worked perfectly in the workshop, but once at the customer's, it didn't work anymore.

    The Comfort system remembers the deceleration points and the end points are meticulous. It is, of course, sometimes possible for the dimensions of the cabinet of the customer to vary slightly from those in the workshop. Solving this problem will require a complete reset of the deceleration points.

  • Dimensioning
    Always required




  • Components
    To be completed with quotation or order

      1. Basic package  


      2. Accessories  



      3. Options  




      4. Comments  
  • Company information
    To be completed for quotation, order and/or drawings

      Data  
  • General Manual

  • Quotation - Order - Drawings

      1. Quotation / Order  

      2. Drawings  

      3. Send  
      4. Reporting